Table of Contents
Advertisement
Receiving and Responding to a Private Call
(Trunking
Only)†‡
A Private Call is a call from an individual radio to another
individual radio.
These one-to-one calls between two radios are not heard by
others in the current talkgroup. The calling radio automatically
verifies that the receiving radio is active on the system and can
display the caller's ID.
Note:
Your radio automatically exits the feature, if the feature
inactivity timer is enabled and when your radio is left
idle and the timer expires. You hear the Inactive Exit
Tone upon feature exit.
Procedure:
When you receive a Private Call:
1
You hear two alert tones and the LED blinks green. The
backlight of the screen turns green and the display shows
CALL RCV, alternating with the caller alias (name) or ID
(number).
2
Press the Call Response button within 20 seconds after the
call indicators begin.
3
Press and hold the PTT button to talk. Release the PTT
button to listen.
4
Press the Call Response button to hang up.
28
English
You cannot initiate a Private Call.
Receiving and Responding to a Telephone Call
(Trunking
Only)†‡
This feature allows you to receive calls similar to standard
phone calls from a landline phone.
Note:
Your radio automatically exits the feature, if the feature
inactivity timer is enabled and when your radio is left
idle and the timer expires. You will hear the Inactive
Exit Tone upon feature exit.
Procedure:
When you receive a Telephone Call:
1
You hear a telephone-type ringing and the LED blinks green.
The backlight of the screen turns green and the display
shows PHN CALL.
2
Press the Call Response button within 20 seconds after the
call indicators begin.
3
Press and hold the PTT button to talk. Release the PTT
button to listen.
4
Press the Call Response button to hang up.
You cannot initiate a Telephone Call.
Advertisement
Table of Contents
