Table of Contents
Advertisement
Ceramic hob surface layout
A
= 1.80 kW hyper-speed zone (Ø 200 mm)
B
= 1.20 kW hyper-speed zone (Ø 165 mm)
C
= Control knobs
Using the ceramic hob
Before first use
IMPORTANT: You should clean the ceramic hob surface (see
"Cleaning and maintenance" section).
o You should switch on one cooking zone at a time, for 5 minutes
at the maximum setting. This will help to eliminate any new
smell that exists and evaporate any humidity that has formed on
the heating elements during transit.
o Do not burn off more than one zone at once.
o You must place a saucepan filled half full with cold water on
each zone as you burn it off.
10
Advertisement
Table of Contents
