Table of Contents
Advertisement
Quick Links
SPORTS ART COMMERCIAL GRADE 6100E
SAFETY GUIDELINES:
Please read and follow these safety guidelines:
. Read this owner's manual and follow the instructions
. Assemble and operate the treadmill on a solid, level surface.
. Never allow children on or near the treadmill.
. Check the treadmill before every use. Make sure all parts are assembled, and all
nuts and bolts are tightened. DO NOT use the treadmill if the unit is disassembled
in any way.
. Keep your hands away from moving parts.
. Wear proper workout clothing: DO NOT wear loose clothing. DO NOT wear shoes
with leather soles or high heels. Tie all long hair back.
. Don't rock the unit from side to side, and use care when mounting and dismounting
the unit.
. DO NOT use any accessories that aren't specifically recommended by the
manufacture these might cause injuries or cause the unit to fail.
. Work within your recommended exercise level DO NOT work to exhaustion.
. If you feel any pain or abnormal symptoms, STOP YOUR WORKOUT and consult
your physician immediately.
Warning─To reduce the risk of burns, fire, electric shock, or injury to persons:
. A treadmill should never be left unattended when plugged in. Unplug from outlet
when not in use, and before putting on or taking off parts.
. Close supervision is necessary when this treadmill is used by, on, or near children,
invalids, or disabled persons.
. Use this treadmill only for its intended use as described in this manual.
. Never operate this treadmill if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or dropped into water. Return the
treadmill to a service center for examination and repair.
. Do not carry this treadmill by supply cord or use cord as a handle.
MOTORIZED TREADMILL
1
Advertisement
Table of Contents
Related Manuals for SPORTS ART 6100E
Summary of Contents for SPORTS ART 6100E
- Page 1 SPORTS ART COMMERCIAL GRADE 6100E MOTORIZED TREADMILL SAFETY GUIDELINES: Please read and follow these safety guidelines: . Read this owner's manual and follow the instructions . Assemble and operate the treadmill on a solid, level surface. . Never allow children on or near the treadmill.
-
Page 2: Safety Guidelines
. Keep the cord away from heated surfaces. . Never operate the treadmill with the air openings blocked. Keep the air openings free of lint, hair, and the like. . Never drop or insert any object into any opening. . Do not use outdoors. . -
Page 3: Table Of Contents
TABLE OF CONTENTS 1. SAFETY GUIDELINES..................2. INTRODUCTION....................3. ASSEMBLING YOUR TREADMILL..............Installation Requirements..................List of parts......................Step by step instructions..................Floor level adjustment..................4. MODES OF OPERATION..................MANUAL......................What each of the categories means..............5. RUNNING ON THE TREADMILL................ 6. -
Page 4: Introduction
Congratulations on purchasing one of the finest pieces of commercial exercise equipment on the market today, the 6100E. Constructed of high quality materials and designed for years of troublefree usage. We hope the 6100E will be an integral part of your fitness regimen. -
Page 5: Assembling Your Treadmill
ASSEMBLING YOUR TREADMILL Installation Requirements Read this owner's manual and follow the instruction contained herein. Caution: Two persons are recommended to assemble the treadmill. To avoid back strain, and to ensure safety to the unit and yourself, we suggest you avoid lifting the running bed assembly from box. -
Page 6: Step By Step Instructions
Step By Step Instructions When you remove the treadmill from its box, first check to make sure all of the parts are present. Then, read through the assembly instructions before you begin. 1. Lay the treadmill on its side. Make sure the running belt is in position in the tracks of the Belt Alignment Guides on the underside of the machine. - Page 7 3. Assemble the water bottle/personal stereo holder to the right front post using the screws provided.(see Fig. 3). FIG.3 IMPORTANT: Before using the treadmill , the left edge of the running belt must be completely in the green portion of the BELT ALIGNMENT GAUGE, located on the left side of the motor shroud.
-
Page 8: Floor Level Adjustment
Floor Level Adjustment If the treadmill is unsteady on your floor, turn the floor level adjustment on the rear feet of the treadmill. Raise or lower the floor level adjustment to steady your treadmill (see Fig. 5). FIG.5... -
Page 9: Modes Of Operation
MODES OF OPERATION CAUTION: DO NOT STAND ON THE BELT WHEN STARTING. Straddle the belt with your feet on the right and left staging platforms. MANUAL: As soon as you turn on the machine, it will go straight into the "MANUAL" mode. The speed LED will flash, press the SPEED key to start the treadmill, and the INCLINE keys to raise or lower the treadmill. -
Page 10: Running On The Treadmill
RUNNING ON THE TREADMILL Now, you have become familiar with your treadmill's operation and are ready to exercise: 1. Plug the treadmill into a standard outlet. Turn on the power switch located on the front of the machine. 2. Straddle the belt with your feet on the right and left staging platforms. 3. -
Page 11: Adjusting The Running Belt
Spillage of liquids onto or into the machine will void the warranty. Adjusting the Running Belt Your 6100E comes with a belt alignment gauge located on the left side of the motor cover. The edge of the running belt should be in the middle of the green portion of the gauge. - Page 12 1. Turn on the power switch located on the front of machine. 2. Press the SPEED key to increase the speed until the speed registers 2.0mph / ▲ 3.2kph on the digital display. 3. While the unit is running at 2 mph/3.2kph, determine where the belt is in relation to the belt alignment gauge.
- Page 13 Periodically monitor the position of the belt to ensure peak performance: When you are using the treadmill, if you feel a pause in the belt with each foot plant the belt is too loose. Stop the machine, check the belt tension, left the running belt off the deck in the middle (see 7 &...
-
Page 14: Trouble Shooting
TROUBLE SHOOTING ERR Message ERR 1- The optical switch mounted on the motor is not receiving the signal reflected from the tachometer wheel. Please contact your dealer. ERR 3- The user is running faster than the belt. Please turn off the machine and try normal use again. -
Page 15: Fuse Failure For Electronics Package And Motor
Fuse Failure For Electronics Package And Motor If nothing is displayed on the electronics package, please check the POWER switch located on the front of the treadmill. If it is unlit, then the fuse is damaged and must be replaced. CAUTION: MAKE SURE THE TREADMILL PLUG IS REMOVED FROM OUTLET BEFORE REPLACING THE FUSE. -
Page 16: Fuse Failure For Incline System
Fuse Failure For Incline System Should the incline system refuse to respond, but there is power to the electronics package and it remains operable, please replace the incline system fuse. The 4amp fuse is for the Incline system. To remove the incline system fuse, push on the fuse holder and then turn the holder counterclockwise and the fuse holder with fuse will protrude. - Page 17 Wiring Schematic: Your Authorized SPORTS ART Distributor...
- Page 18 15A15...