Using A Child Restraint System; Installing A Child Restraint Seat; Installation On Rear Seats - Hyundai 2001 Sonata Owner's Manual

B230B01E-GAT

Using a Child Restraint System

Cover, Child Restraint
Hook Holder
Bolt, Holder
(5/16" - 30 mm)
Washer, Conical Spring
Holder, Child Restraint Hook
Spacer (10 mm), Hook
Holder Cover
Spacer, Child Restraint
Hook Holder
Retainer Washer
For small children and babies, the use of a child
seat or infant seat is strongly recommended.
This child seat or infant seat should be of
appropriate size for the child and should be
installed in accordance with the manufacturer's
instructions. It is further recommended that the
seat be placed in the vehicle's rear seat since
this can make an important contribution to safety.
Your vehicle is provided with three child re-
straint hook holders for installing the child seat
or infant seat.
FEATURES OF YOUR HYUNDAI
B230C02Y-AAT

Installing a Child Restraint seat

Rear seat package tray
B230B01Y
Tether Strap Hook
Three child restraint hook holders are located
on the rear seat package tray. To install the
child restraint seat, connect the child restraint
tether strap hook to the child restraint hook
holder and tighten to secure the seat.
Anchorage
Front of Vehicle
B230C01Y
B230G01Y-AAT

Installation on Rear Seats

To install a child restraint system in the rear
seats, extend the shoulder/lap belt entirely from
its retractor until a "click" is felt. This will engage
the seat belt retractor automatic locking feature,
which allows the seat belt to retract but not
extend. Install the child restraint system, buckle
the seat belt and allow the seat belt to take up
any slack. Make sure that the lap portion of the
belt is tight around the child restraint system
and the shoulder portion of the belt is positioned
so that it can not interfere with the child's head
or neck. Also, double check to be sure that the
retractor has engaged the Automatic Locking
feature by trying to extend webbing out of the
retractor. If the retractor is in the Automatic
Locking mode, the belt will be locked. After
installation of the child restraint system, try to
move it in all directions to be sure the child
restraint system is securely installed. If you
YR10400B
1- 17