Table of Contents
Advertisement
B170A03A-AAT
HEIGHT ADJUSTABLE FRONT SEAT
SHOULDER BELT
You can adjust the height of the shoulder belt
anchor to one of the 4 positions.
If the height of the adjusting seat belt is too near
your neck, you will not be getting the most
effective protection. The shoulder portion should
be adjusted so that it lies across your chest and
midway over your shoulder nearest the door
and not your neck.
To adjust the height of the seat belt anchor,
lower or raise the height adjuster into an appro-
priate position when the height adjuster button
is pushed.
Release the button to lock the anchor into
position. Try sliding the release button to make
sure that it has locked into position.
WARNING:
o The height adjuster must be in the locked
position when the vehicle is moving.
FEATURES OF YOUR HYUNDAI
o The misadjustment of height of the shoul-
der belt could reduce the effectiveness
of the seat belt in a crash
B190A01Y-AAT
SEAT BELTS-Front Passenger and
Rear Seat 3-Point System with Com-
bination Locking Retractor
To Fasten Your Belt
B170A01Y
Combination retractor type seat belts are in-
stalled in the rear seat positions to help accom-
modate the installation of child restraint sys-
tems. Although a combination retractor is also
installed in the front passenger seat position,
Hyundai strongly recommends that children al-
ways be seated in the rear seat. NEVER place
any infant restraint system in the front seat of
the vehicle.
This type of seat belt combines the features of
both an emergency locking retractor seat belt
and an automatic locking retractor seat belt. To
fasten your seat belt, pull it out of the retractor
and insert the metal tab into the buckle. There
will be an audible "click" when the tab locks into
the buckle. When not securing a child restraint,
the seat belt operates in the same way as the
driver's seat belt (Emergency Locking Retrac-
tor Type). It automatically adjusts to the proper
length only after the lap belt portion of the seat
belt is adjusted manually so that it fits snugly
around your hips. When the seat belt is fully
extended from the retractor to allow the instal-
lation of a child restraint system, the seat belt
operation changes to allow the belt to retract,
but not to extend. (Automatic Locking Retractor
Type). See page 1-17.
NOTE:
Although the combination retractor provides
the same level of protection for seated pas-
sengers in either emergency or automatic
locking modes, it is recommended that seat-
ed passengers use the emergency locking
YR10301B
feature for improved convenience. The au-
tomatic locking function is intended to facil-
itate child restraint installation. To convert
from the automatic locking feature to the
emergency locking operation mode, allow
the unbuckled seat belt to fully retract.
WARNING:
o For maximum restraint system protec-
tion, the seat belts must always be used
whenever the car is moving.
1- 13
Hide quick links:
Advertisement
Table of Contents
