Tire Balancing; Tire Traction; When To Replace Tires; Spare Tire And Tools - Hyundai 2001 Sonata Owner's Manual

2001 sonata
Table of Contents

Advertisement

CONSUMER INFORMATION & REPORTING SAFETY DEFECTS
I070A01A-AAT

TIRE BALANCING

A tire that is out of balance may affect handling
and tire wear. The tires on your Hyundai were
balanced before the car was delivered but may
need balancing again during the years you own
the car.
Whenever a tire is dismounted for repair, it
should be rebalanced before being reinstalled
on the car.
I080A01A-AAT

TIRE TRACTION

Tire traction can be reduced if you drive on
worn tires, tires that are improperly inflated or
on slippery road surfaces. Tires should be re-
placed when tread wear indicators appear. To
reduce the possibility of losing control, slow
down whenever there is rain, snow or ice on the
road.
I090A01A-AAT

WHEN TO REPLACE TIRES

0.06 in. (1.6 mm)
Wear indicator
WARNING:
Driving on worn-out tires is dangerous!
Worn-out tires can cause loss of braking
effectiveness, steering control and traction.
When replacing tires, never mix radial and
bias ply tires on the same car. If you replace
radial tires with bias-ply tires, they must be
installed in sets of four.
The original tires on your car have tread wear
indicators. The tread wear indicators appear
when the tread depth is 0.06 in. (1.6 mm). The
tire should be replaced when these appear as a
solid bar across two or more grooves of the
tread. Always replace your tires with those of
the recommended size. If you change wheels,
the new wheel's rim width and offset must meet
Hyundai specification.
WARNING:
o Using tires and wheels of other than the
recommended sizes could cause unusu-
al handling characteristics that could
cause death, serious injury, or property
damage.
o Wheels that do not meet Hyundai's di-
mensional specifications may fit poorly
and result in damage to the vehicle, in-
cluding broken wheel studs.
I100A01A-AAT
SSA8060C

SPARE TIRE AND TOOLS

Your Hyundai is delivered with the following:
Spare tire and wheel
Wrench
Jack
Jack handle
D040B01Y
8-3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents