System Operation - Trane MCC 518 ZB Owner's Manual

10

System Operation

- The temperature should not be
set lower than what you need.
This would result to increase
energy cost.
- Clean the air filter every week for
higher efficiency.
- Draw close curtains or close glass
windows when cooling to prevent
heat load from sun light which may
cause more electricity cost.
- To distribute cool air through out
the room, adjust air flow direction
to diffuse cool air.
- Close windows and doors while
operating the unit to prevent
leakage of cooled air to save
energy.
- In case of ineffective ventilation,
open the window to ventilate the
room air once in a while but not
too long since cooled air will be
uselessly drained out.
- Check electrical system (voltage
and frequency). Use the proper
power supply indicated on the unit
to operate the air conditioner and
only fuses with specified capacity.
Do not use pieces of wire instead
of fuse.
- Do not insert objects into the air
inlet or outlet when the air
conditioner is running as it may
cause damage or personal injury.
- Do not channel the air flow directly
at people, especially infants, aged
persons, or patients.
- Turn off the air conditioner if, while
running electricity interference
occurs. If the unit is not to be used
for a long time, cut off the power
supply main switch.
- Do not locate any obstacles
against the air flow direction of
indoor and outdoor units. Inefficient
performance or malfunction may
result.
- Do not locate a heater or any other
heat sources close to the unit. The
heat may deform the plastic parts.
MCC-SVU02A-EN