Table of Contents
Advertisement
Making an intercom call
1.
Make sure the phone is OFF (not in talk mode).
2.
Press INT button on handset, the Int symbol appears and the
registered handsets shows on the display, enter the handset number
you want to page.
3.
The cordless handset rings, and the Int symbol flashes on handset
display. When the handset user answers, you will be connected.
Answering an intercom call
The ringing tune for intercom calls is different from external calls. When
someone makes an intercom call to you, Int icon appears on your cordless
handset‟s display with the number of the handset calling you.
1. Press the TALK/SPEAKER button to answer.
2.
To end an intercom call, press the HANG UP button or place the
handset in the base cradle.
Transfer an external call
You can transfer an external call to another handset that is registered to
the base station.
1.
During an external call, press the INT button, the external call is put on
hold and the registered handset shows on the display,
2.
Enter the handset number you want to page.
3.
When the receiving handset answers, you can announce the call.
4. Press the HANG UP button on the original handset to transfer the call.
NOTE: If the receiving handset does not answer within 30
seconds, the external call will come back to you and your
handset will ring. You can press the TALK/SPEAKER button to
take the external call again.
Making conference call (three-way conversation)
You can connect one external call to two handsets registered at the base
station.
All users can TALK/SPEAKER and listen simultaneously.
1.
During an external call, press the INT button on the handset , the
external call is put on hold and the registered handset shows on the
display, enter the handset number you want to page.
2. Wait until the internal user answers.
3. Press and hold the INT button on original handset to start a three-way
conference call.
12
Advertisement
Table of Contents
