Table of Contents
Advertisement
Ring melody
You may choose from ten different melodies for a ring tone.
From Handset Tones setting sub-menu:
1. Press the Navigation (or ) button to select Ring Melody.
2. Press the MENU/OK button to enter the menu.
3. Press the Navigation (or ) button to select the desired melody ring
tone.
4. Press the MENU/OK button to save your selection. You will hear a
confirmation tone.
Key Beep
From Handset Tones setting sub-menu:
1. Press the Navigation (or ) button to select Key Beep.
2. Press the MENU/OK button to enter the menu.
3. Press the Navigation (or ) button to select On or Off.
4. Press the MENU/OK button to confirm. You will hear a confirmation
tone.
Handset Name
From the Personal Set sub-menu:
1. Press the Navigation (or ) button to scroll to the Handset Name
sub-menu.
2. Press the MENU/OK button to enter the menu.
3.
Use the touch tone pad to enter a name (up to 10 characters). More
than one letter is stored in each of the number keys. For example, to
enter Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3
times for the letter I.
Press the 5 key 3 times for the letter L. Press the 5 key 3 times for the
second letter L, and press the 1 key to insert a space between the first
and last name. Press the 7 key 4 times for the letter S; press the 6 key
once for the letter M; press the 4 key 3 times for the letter I; press the 8
key for the letter T; press the 4 key twice for the letter H.
NOTE: 1) If you make a mistake, use the BACK/R/C button
to backspace and delete one character at a time. 2) Use the
#/Pause/ringer button to toggle between upper case and lower
case text entry.
10
Advertisement
Table of Contents
