RCA 2130 DECT Quick Setup Manual page 14

Everyday use
"I cannot make or
answer calls"
"I cannot make a call"
"When I press on
the keys, nothing
happens"
"When I key in
a number, it
appears on the display,
but I cannot make
an outside call"
If the handset‟s display is blank, it may have
been switched off. Press and hold the HANG-UP
key to switch it back on.
Check that the base unit‟s main power adapter
is plugged in and power is switched on.
The base unit needs main power for normal
operation of the phone
– not just for charging the batteries.
Make sure you are using the telephone line
cable supplied with your phone. Other telephone
line cables might not work. Move the handset
closer to the base unit.
Check the battery level symbol on the display.
If it is low, replace the handset on the base unit
or charger pod to recharge the batteries.
Switch off power at the main socket, wait for a
short time and then switch back on. This may
solve the problem.
If the handset display shows KEYS LOCKED,
press and hold the * button to unlock it before
you make a call.
Only one handset (or the base unit) can be
connected to the outside line at a time.
If another handset is already using the line,
you need to wait until it has finished its call.
Make sure the batteries are fitted in your
handset. If the Battery Level symbol on the
display shows „low‟, put your handset back on
the cradle to charge.
Try a different position for the base unit –
somewhere higher if possible, or further from
other electrical equipment.
Try moving the handset closer to the base unit.
14