BOMBARDIER 1983 Shop Manual page 29

Inside lip
facing towards
the crankcase
\~
Chamfered side
towards the
crankshaft bearing
SECTION 02 ENGINE
SUB-SECTION 01 (247 ENGINE TYPE)
® ®
G)Torque to 22 N. m (16 ft-Ibs) following illus-
t rated seq uence.
@
To install new seal into crankcase use an appropriate
4
+-+~~,
oil sea l pushe r as illust rated . (See Too ls Section) .
Also , prior to crankcase adjoining, install a protector
sleeve on each crankshaft extension to prevent oi l sea l
damage (See Tool Section). App ly a lig ht coat of lithi-
um grease on sea l lip .
_ CAUTION: To ensure appropriate crankshaft
". bearing lubrication, seal outer surface must be
pressed on seal crankcase shoulder.
@To rque to 35
N.
m (26 ft-Ibs) .
@
Position labyrinth ring with bevelled side on top .
To install magneto, refer to "Magneto" in this section .
PAGE29