Testing The Expansion Memory - Kyocera FS-1750 Installation Manual

Testing the Expansion Memory

After you have finished installing SIMMs in the printer, test the printer to see if the instal-
lation has been successful.
To test the expansion memory, proceed as follows:
1.
Make sure the power switch is off. Plug the power cord into the printer and turn power
on.
When the printer is on-line, press the STATUS key.
2.
3.
If the installation has been successful, the amount of memory shown on the status page
in the User's Manual (PDF file) provided on the Kyocera Digital Library CD-ROM will
correspond with the amount of expanded memory. (The factory installed memory size
is 8 MB for the FS-1750 and 16 MB for the FS-3750.)
5. Memory Expansion Installation
21