Reverse Projection - Runco Reflection CL-410 Owner's Operating Manual

When you project from behind the screen (rear projection), using a mirror, or from a
ceiling mount, you need to reverse the image so that the image the audience sees is
correctly oriented. The Picture Configuration item in the Installation menu enables you
to adjust images for these types of projection.
Rear Projection
■ Place a transparent screen between the
projector and the audience.
■ Reverse the image by setting Picture
Configuration to Floor Rear in the
Installation menu. See "Installation" on
page 41.
Projection using a mirror
■ Place a normal flat mirror in front of the
lens.
■ If the mirror is placed on the side of the
audience, reverse the image by setting
Picture Configuration to Floor Rear in
the Installation menu. See "Installation"
on page 41.
Note:
When using a mirror, be sure to position
both the projector and the mirror so that
the light does not shine into the eyes of
the audience.
23
Connection and Setup

Reverse Projection