Important; Safety; Installation; Cleaning - DIS CDS 4000 User Manual & Installation Manual

CDS 4000

Important

Safety

Check that the operating voltage of the unit is
identical with the voltage of your local power
supply. If a voltage conversion is required, consult
your DIS dealer or qualified personnel.
Should any liquid or solid object fall into the
cabinet, unplug the unit and have it checked by
qualified personnel before operating it further.
Unplug the unit from the wall outlet or set the Main
Power switch to OFF if it is not used for several
days.
To disconnect the cord, pull it out holding the plug.
Never pull the cord itself.

Installation

Allow adequate air circulation to prevent internal
heat built-up. Do not place the unit on a surface
(rugs, blankets, etc.) that may block the ventilation
holes.
Do not install units in a location near heat sources
such as radiators or air ducts, or in a place exposed
to direct sunlight, excessive dust or humidity,
mechanical vibration or shock.
To avoid moisture condensations do not install
units where the temperature may change rapidly.
Please further observe the installation guidance
provided in this manual.
Manual no. 4479, Printed in Denmark, 02/03

Cleaning

To keep the cabinet in its original condition,
periodically clean it with a soft cloth.
Stubborn stains may be removed with a cloth
lightly dampened with a mild detergent solution.
Never use organic solvents such as thinners or
abrasive cleaners since these will damage the
cabinet.

Repackaging

Save the original shipping carton and packing
material. They will become handy if you ever have
to ship the unit. For maximum protection, repack
the unit as originally packed from the factory.
If not supplied with the equipment, a complete
transportation and storage box system is available
from DIS. We recommend you to use this system
for long term protection and care.

Warranty

The individual units in the CDS 4000 is minimum
covered by 12 months warranty against defects in
materials or workmanship.
IMPORTANT
6