Error Displays/Messages - Sony MEX-BT3800U Operating Instructions Manual

•
34
"OFF BT" appears when initializing.
Press and hold (]I) until
"0"
turns off. Then
initialize again (page 25).
The external microphone does not work.
The setting of the microphone is not correct.
- Set "MIC-EXT" (page 26).
Error displays/Messages
CHECKING
The unit is confirming the connection of a USB device.
- Wait until confirming the connection is finished.
ERROR
• The disc is dirty or inserted upside down.
-Clean or insert the disc correctly.
• A blank disc has been inserted.
• The disc cannot play due to a problem.
- Insert another disc.
• USB device was not automatically recognized.
- Reconnect it again.
• Press
~
to remove the disc.
FAILURE (Illuminates until any button is pressed.)
The connection of speakers/amplifiers is incorrect.
- See the installation/connections manual of this
model to check the connection.
FAILURE (Illuminates for about I second.)
When the SAT tuner is connected, storing an SAT
radio channel into a preset failed.
- Be sure to receive the channel that you want to
store, then try it again.
HUB NO SUPRT (HUB Not Support)
USB hub is not supported on this unit.
L. SEEK
+/-
The local seek mode is on during automatic tuning.
NO DEV (No Device)
USB is selected as source without a USB device
connected. A USB device or a USB cable has been
disconnected during playback.
- Be sure to connect a USB device and USB cable.
NO MUSIC
The disc or USB device does not contain a music file.
-Insert a music CD in this unit.
- Connect a USB device with a music file in it.
NO NAME
A disc/alburn/artist/track name is not written in the
track.
OFFSET
There may be an internal malfunction.
- Check the connection. If the error indication
remains on in the display, consult your nearest
Sony dealer.
OVERLOAD
USB device is overloaded.
- Disconnect the USB device, then change the source
by pressing
(SOURCE/OFF ).
-Indicates that the USB device is out of order, or an
unsupported device is connected.
READ
The unit is reading all track and album information on
the disc.
- Wait until reading is complete and playback starts
automatically. Depending on the disc structure, it
may take more than a minute.
RESET
This unit or USB device cannot be operated due to a
problem.
- Press the RESET button (page 6).