Error Displays/Messages - Sony MEX-BT3600 Operating Instructions Manual

G:\Sagyo\SONY\DATA\3299319311\329931931MEXBT3600UCA\01US02CD-
CA.fm
00US+00COV-CA.book Page 28 Tuesday, January 29, 2008 3:04 PM
The sound skips during playback of a
Bluetooth audio device.
• Reduce the distance between the unit and the
Bluetooth audio device.
• If the Bluetooth audio device is stored in a case
which interrupts the signal, remove the audio device
from the case while using.
• Several Bluetooth devices or other devices which
emit radio waves are used nearby.
t Turn off the other devices.
t Reduce the distance from the other devices.
• The playback sound stops momentarily when the
connection between this unit and the cellular phone is
being made. This is not a malfunction.
The connected Bluetooth audio device cannot
be controlled.
Check that the connected Bluetooth audio device
supports AVRCP.
Some functions do not work.
Check if the connecting device supports the functions
in question.
A call is answered unintentionally.
The connecting phone is set to answer a call
automatically.
No sound is output from the car speakers
during handsfree call.
If the sound is output from the cellular phone, set the
cellular phone to output the sound from the car
speakers.
"OFF BT" appears when initializing.
Press and hold (BT) until "
initialize again (page 17).

Error displays/Messages

CHECKING
The unit is confirming the connection of a USB device.
t Wait until confirming the connection is finished.
ERROR
• The disc is dirty or inserted upside down.
t Clean or insert the disc correctly.
• A blank disc has been inserted.
• The disc cannot play due to a problem.
t Insert another disc.
• USB device was not automatically recognized.
t Reconnect it again.
• Press Z to remove the disc.
FAILURE
The connection of speakers/amplifiers is incorrect.
t See the installation/connections manual of this
model to check the connection.
HUB NO SUPRT
USB HUB is not supported on this unit.
L. SEEK +/–
The local seek mode is on during automatic tuning.
NO INFO
Text information is not written in the MP3/WMA/
AAC file.
28
NO MUSIC
The disc/USB device does not contain a music file.
t Insert a music CD in this unit.
t Connect a USB device with a music file in it.
NO NAME
A disc/album/track name is not written in the track.
NO TRACK
The selected item in the USB device does not contain
an album/track.
OFFSET
There may be an internal malfunction.
t Check the connection. If the error indication
OVERLOAD
USB device is overloaded.
t Disconnect the USB device, then change the source
t Indicates that the USB device is out of order, or an
READ
The unit is reading all track and album information on
the disc/USB device.
t Wait until reading is complete and playback starts
RESET
The CD unit cannot be operated due to a problem.
t Press the RESET button (page 6).
USB NO DEV (No Device)
" turns off. Then
(SOURCE) is selected without a USB device
connected. A USB device or a USB cable has been
disconnected during playback.
t Be sure to connect a USB device and USB cable.
USB NO SUPRT (USB Not Support)
The connected USB device is not supported.
t Connect a USB device of Mass Storage Class
"
During reverse or fast-forward, you have reached the
beginning or the end of the disc and you cannot go any
further.
"
The character cannot be displayed with the unit.
If these solutions do not help improve the situation,
consult your nearest Sony dealer.
If you take the unit to be repaired because of CD
playback trouble, bring the disc that was used at the
time the problem began.
remains on in the display, consult your nearest
Sony dealer.
by pressing (SOURCE).
unsupported device is connected.
automatically. Depending on the disc/USB device
structure, it may take more than a minute.
(page 21).
" or "
"
MEX-BT3600U
3-299-319-31 (1)
masterpage:Left
"