Shifter System (If So Equipped); Vts (Variable Trim System) (If So Equipped); Safety Lanyard And Engine Start/Stop Button; Storage Compartment Covers - Sea-doo GS 5644 Operator's Manual

Shifter System
(if so equipped)
Check reverse gate operation for free
movement. With shift lever in forward
position, the gate should be in upward
position and locked. With the shift le-
ver in neutral position, gate should be
in middle position. With shift lever in
reverse position, gate should be in
downward position.
WARNING
Verify the reverse gate locking op-
eration before starting the engine.
VTS (Variable Trim System)
(if so equipped)
Push on arrows on VTS button to check
nozzle movement.
NOTE: With the safety lanyard discon-
nected, electrical system can be acti-
vated for approximately 33 seconds by
depressing the engine start/stop button.
Safety Lanyard and Engine
Start/Stop Button
If craft is equipped with shift lever, po-
sition lever in neutral. Ensure that both
switches operate properly. Start en-
gine and stop it using each switch in-
dividually.
WARNING
If engine does not shut-off when
pushing engine start/stop button
or by disconnecting the safety lan-
yard, stop the engine by applying
the choke and turning fuel tank
valve (if so equipped) to OFF posi-
tion. Do not operate the watercraft
further, see an authorized Sea-Doo
dealer.
Storage Compartment
Covers
Ensure they are closed and latched.
www.SeaDooManuals.net
47