Bulk Ink System Chip Reset Instructions - Epson Office T30 Getting Started Manual

CHIP RESET INSTRUCTIONS
The ChromaBlast QuickConnect bulk ink system for the Epson WF30/T30/B40W printer
contains a cartridge with five individual dampers that is used in place of the individual
OEM (Epson) cartridges. This bulk ink system cartridge has a single chip that periodically
needs to be reset so that the printer can continue to use ink from the bulk ink system. The
frequency of this reset action will depend upon the number of images that are printed and
the printer settings.
The following are simple instructions for resetting the bulk ink system.
1.
Once the printer recognizes that the
ink levels have reached a certain level, it
will cease to print and the orange ink-out
light will start to flash.
3.
Press the white reset button at the top
of the bulk ink system ink cartridge.
16
2.
Press the ink-out button until the ink
carriage moves into the far right position.
The ink carriage will come to rest in the
carriage bay area.
4.
Again, press the ink out button on the
front of the printer.
5.
The printer will begin to reset and
recharge. After the printer has completed
the resetting activity, the orange light will
turn off. At this point the bulk ink system
has been successfully reset and the
printer is again ready for use.
Sawgrass Technologies, Inc. ~ www.sawgrassink.com