3.
Slowly extract the plunger. Ink will start to flow
through the tubing into the damper. Continue
extracting the plunger until ink begins to flow into
the tip of the syringe.
Note: You may have to repeat this process twice to
complete the priming of each ink damper.
Repeat this process for the other four channels.
Note: You may have to take the syringe out, lower
the plunger and reinsert it into the damper in order
to completely prime the damper cartridges.
Once the ink bags have been connected, your ChromaBlast QuickConnect
Bulk Ink System should look like the graphic above.
12
Sawgrass Technologies, Inc. ~
www.sawgrassink.com