Epson SureColor T5170 User Manual

Epson SureColor
®

Start Here

IMPORTANT: Before using this product, make sure you read these instructions
and the safety instructions in the online User's Guide.
Choose a Location for the Printer
Choose a location for the printer that is near a wall outlet where the power cord
can be easily unplugged. Avoid places subject to rapid changes in temperature
and humidity. Also keep the printer away from direct sunlight, strong light, or
heat sources.
Make sure to place the printer on a flat, stable surface with enough space on
all sides (see illustrations below). The surface supporting the printer should be
wider than the space between the rubber feet on the bottom of the printer and
capable of supporting the weights shown below.
SureColor T3170
1.97 in.
(50 mm)
14.57 in.
(370 mm)
W
Weight: 83.78 lbs (38 kg)
Unpack
1
Make sure you have these items:
Printer and roll spindle
Note:
• See the online User's Guide for instructions on using the output tray.
• The SureColor T5170 comes with a stand and paper basket. See the
online User's Guide for instructions on assembling these parts.
WARNING:
The printer requires two people to lift and move it. Make sure to
grip the printer as shown in the illustration.
Note: Do not hold the printer by its paper support.
T3170/T5170
®
SureColor T5170
5.9 in.
(150 mm)
1.97 in.
H
(50 mm)
12.2 in.
(310 mm)
D
1.57 in.
W
(40 mm)
Weight: 101.41 lbs (46 kg)
Ink cartridges (4) Power cord
Output tray Limited warranty
2
Remove the plastic sheet and all tape from the outside of the printer.
3
Open the left cover.
4
Remove the tape and the protective piece.
5.9 in.
(150 mm)
H
D
5
Close the left cover.
6
Open the front cover.
7
Turn and remove the protective piece.
8
Press the sides of the protective piece, and then lift and remove it.