Epson Office T30 Getting Started Manual page 15

10.
Once the ChromaBlast cartridges are in
place, close the ink cartridge cover and
press it until it clicks into place.
11. Close the printer cover.
12. Press the ink button for one (1) second.
The printer begins charging ink and the
power light starts flashing. This takes
about 1 ½ minutes. When it's finished,
the power light stops flashing and remains
on, and the ink light goes out.
Sawgrass Technologies, Inc. ~ Epson
Never turn off the printer while the power light is flashing or
you'll waste ink. If the ink light stays on (not flashing), the ink
cartridge may not be installed correctly. Press the ink button
again and reinstall the ink cartridge until it clicks into place.
WorkForce 30/T30/B40W~ ChromaBlast™
®
7