Table of Contents
Advertisement
Introduction
Thank you for selecting the Exterior 400™ Image Projector, a compact IP65-rated LED-based
color-changing projector from Martin Professional™. The Exterior 400 Image Projector features:
• Seven Luminus CBT-90 (50 W) LEDs
• Narrow-, medium- and wide-angle options
• Motorized rotating gobo wheel with slots for 6 interchangeable gobos plus open, indexing, continuous
gobo rotation & scrolling, shake
• Motorized color wheel with slots for 8 interchangeable color filters plus open
• Motorized iris
• Electronic shutter with instant intensity control, 2 - 9 Hz strobe effects and pulse effects
• Motorized focus, approx. 2 m (6.6 ft.) to infinity
• DMX 512A control
• Stand-alone operation with up to 100 programmable scenes
• Synchronized (master/slave) stand-alone operation
• RDM (Remote Device Management)
• Auto-sensing power supply unit with 100-240 VAC, 50/60 Hz operating range
• Remote configuration and addressing over the DMX data link.
For the latest photometric data, firmware updates, documentation, product specifications and other
information about this and all Martin Professional™ products, please visit the Martin website at
http://www.martin.com
Comments or suggestions regarding this document may be e-mailed to service@martin.dk or posted to
Technical Documentation, Martin Professional A/S, Olof Palmes Allé 18, DK-8200 Aarhus N, Denmark.
Unpacking
The following items are included with the Exterior 400 Image Projector:
• 1.8 m (5.9 ft.) power and data cables (installed)
• Adjustable mounting yoke
• This user manual
Using for the first time
Before applying power to the fixture:
• Carefully review "Safety Information" on page 3.
• Check that the local AC power voltage is within the range listed on the fixture's serial number label.
• Install optical components as described in "Installing color filters and gobos" on page 7.
• Install the fixture as described in this manual.
6
Exterior 400 Image Projector user manual
Advertisement
Table of Contents
