Martin Exterior 400 User Manual page 26

Configuring stand-alone settings
First, the fixture needs to be configured to know if and when to activate a stand-alone program. Connect a
PC running the Martin MUM™ application as described in "Connecting a PC with MUM" on page 21, and
click on the Stand-alone settings button (see Figure 14).
Stand-alone operation can be set to either:
• start automatically as soon as power is applied, or
• respond to a timer trigger that activates operation for one or two periods in a 24 hour period.
Enabling stand-alone operation
To enable stand-alone operation, set Stand-alone operation to Enabled.
Starting automatically
To set stand-alone operation to start automatically, set Auto program to On. The fixture will now start
stand-alone operation automatically as soon as power is applied and no DMX signal is being received.
Setting a timer trigger
To set a timer trigger:
1. Make sure the correct time has been set on the luminaire's built-in clock (see "Setting the clock" on page
22).
2. Select None, Timer 1, Timer 2 or Both Timers in the Enable Timers box.
3. Use the Start Time and End Time spin buttons to set a period of stand-alone operation on the selected
timer(s).
26
Figure 14: Stand-alone settings window
Exterior 400 Image Projector user manual