Table of Contents
Advertisement
Installing Storage Arrays
FIGURE 2–1
Node 1
Oracle's StorageTek 6140 array houses two controllers; each controller has four host ports. The
cabling approach is the same as shown in
direct-attach configuration.
FIGURE 2–2
Figure 2–2
14
Oracle Solaris Cluster 3.3 with StorageTek RAID Arrays Manual • September 2010, Revision A
StorageTek Array Direct-Connect Configuration
Node 2
StorageTek Array Switched Configuration
Node 1
Node 2
Switch
Switch
shows a switched configuration for a two-node storage array.
Controller module
Figure
2–1, but it can support up to four nodes in a
Controller module
Expansion tray
Advertisement
Table of Contents
Need help?
Do you have a question about the Solaris Cluster 3.3 with StorageTek RAID Arrays and is the answer not in the manual?
Questions and answers