Installing Impact Guards/Calf Strap - Invacare 9000 SL Owner's Operator And Maintenance Manual

1. To raise the elevating legrest, the
assistant should hold the support tube
and raise the elevating legrest until the
desired height is obtained.
2. To lower the elevating legrest, perform
the following:
A. Support user leg with one hand.
B. Push release lever downward with
other hand.
C. Gently, lower user leg down and
rest against the legrest.

Installing Impact Guards/Calf Strap

NOTE: For this procedure, refer to FIGURE 4.5.
1. Remove impact guard/calf strap from packaged container if not already secured to the
footrest.
2. Secure one impact guard to the each footrest.
NOTE: Ensure the upper portion of the impact guard is between the two horizontal supports of the
footrest.
3. Secure one side of the calf strap around each footrest (with the impact guards
attached, if present).
Part No.1056953
Calf Strap
Footrest
FIGURE 4.5 Installing Impact Guards/Calf Strap
SECTION 4—FRONT RIGGINGS
FIGURE 4.4 Raising/Lowering Elevating
Legrest Assembly
Upper Portion of
Impact Guard
Horizontal Support
37
Release Lever
Support Tube
Horizontal
Support
Notch
Impact
Guard
9000 Series