Table of Contents
Advertisement
5.7.
Binarization
Configure this setting with BINARIZE. This setting
performs the binarization processing. You can set the
threshold value within the range of 16 to 243 (when 8
bits). If the image output bit is changed, the setting
ranges for the threshold value will be 64 to 975 (when 10
bits) and 256 to 3800 (when 12 bits).
Note
When setting the parameter, convert the threshold value
setting into a value of 12 bits even if you use the camera
in 8 bits or 10 bits.
Reference
The edge detection image can be emphasized by using a
combination of edge detection and binarization
processing.
31
5. DSP Operation
Advertisement
Table of Contents
