System Components - Sony XCL-U100 Technical Manual

System Components

Video Camera Module Camera cable
XCL-U100 CCXC-12P02N (2 m, 6.6 ft)
CCXC-12P05N (5 m, 16.4 ft)
CCXC-12P10N (10 m, 32.8 ft)
CCXC-12P25N (25 m, 82 ft)
Camera module interface
board
Camera Link cable
(Sony Camera-compatible)
C-mount lens
High-resolution lens
Install the board in a PCI bus slot in devices such as a computer. Select a commercially
available interface board compatible with the Camera Link feature. You can use either a board
that supports PoCL, or one that does not.
Performance may also be dependent on the host device (e.g., Computer), so consult the
dealer if images are not displayed properly.
This cable connects to the DIGITAL IF connector on the rear panel of the camera module.
Image/control signals are transmitted via this cable.
If there is support for PoCL, power is also supplied at the same time. If you use a camera
module interface board with support for PoCL, be sure to use a camera link cable with support
for PoCL. The maximum usable length of a cable is 10 m, but the actual usable length may vary
based on the attributes of each cable. Keep this in mind when selecting a cable.
Spotted noise may appear in a specific brightness in the window according to the attribute of
the cable. If this noise is an obstacle, shorten the cable.
Camera adaptor Tripod adaptor
DC-700/700CE VCT-333I (Insulated type)
System Components
5