Table of Contents
Advertisement
Quick Links
Electronic Service
Manuals
This electronic document is provided as a service to our customers.
We do not create the contents of the information contained in this docu-
ment. Should you have detailed questions pertaining to the information
contained in this document, you may contact Michco, or the manufac-
turer which provided the original information in this electronic deliver-
able. Michco's only part in this electronic deliverable was the electronic
assembly process. By providing this manual on line we are not guaran-
teeing parts availability.
You may contact Michco through the following methods:
Phone (517) 484-9312 or (800) 331-3339
2011 N. High St. -- Lansing, Michigan -- 48906
Fax: (517) 484-9836
Email: CustServe@Michco.com
Web site: www.Michco.Com
Parts Web site: www.FloorMachineParts.Com
Order Parts on Line at:
www.FloorMachineParts.Com
Directly to Parts & Service:
By Email:
Shop@Michco.com
By Fax: (517) 702-2041
By Voice: Use numbers above.
Serving the Cleaning Industry Since 1922
Notice: All copyrighted material remains property of original owners, all trademarks are property of respective owners.
Manuals are subject to Manufacturer's reproduction limitations. Originals or reproductions were provided by manufacturers
through a request. We make no warranty as to the correctness of information provided in this document and you assume
all risk. By placing these manuals on line we are not declaring our corporation to be an manufacturer authorized dealer or
provider, please check our web site for authorized manufacturers we represent.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Clarke IMAGE 14 120V
Summary of Contents for Clarke IMAGE 14 120V
- Page 1 Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this docu- ment. Should you have detailed questions pertaining to the information contained in this document, you may contact Michco, or the manufac- turer which provided the original information in this electronic deliver- able.
- Page 2 This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting any service or maintenance procedure to your Clarke machine could result in injury to you or to other personnel; damage to the machine or to other property could occur as well.
-
Page 3: Table Of Contents
Main Frame Assembly Drawing & Parts List ................... 21 Pump Drawing & Parts List ......................22 Connection Diagram 120 Volts ......................23 Electrical Schematic 120 Volts ......................24 Authentic Clarke Products ....................... 25 Page 2 Operator's Manual - Image 14 Clarke ®... -
Page 4: Operator Safety Instructions
15. Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present. 16. Connect to properly grounded outlet. See "Grounding Instructions". SAVE THESE INSTRUCTIONS Operator's Manual - Image 14 Page 3 ® Clarke... - Page 5 16. "Ne brancher qu'à une prise de courant avec mise à la terre. Voir les instructions visant la mise à la terre." CONSERVER CES INSTRUCTIONS Page 4 Operator's Manual - Image 14 Clarke ®...
-
Page 6: Introduction & Machine Specifications
To avoid serious injury, use proper lifting procedures when lifting the machine. WARNING: Make sure that all the labels, decals, warnings, cautions and instructions are readable. Replace them when necessary by ordering them from Clarke. ° WARNING: Do not use water that is hotter than 140 WARNING: Improper discharge of waste water may damage the environment and be illegal. -
Page 7: Instructions - Power Supply 120 Volt
If you use an extension cord, use an extension cord with minimum wire size 14 AWG. Do not use an exten- sion cord longer than 50 feet. Do not join two extension cords. Page 6 Operator's Manual - Image 14 Clarke ®... -
Page 8: Machine Controls
® from the carpet, add a defoamer such as Clarkare Defoamer Concentrate to the recovery tank. The amount needed will change according to the amount of detergent already in the carpet. Operator's Manual - Image 14 Page 7 ® Clarke... -
Page 9: How To Clean Carpet
If the carpet is very dirty, move the machine slower. 8. As the machine is used, dirty solution will begin to fill the recovery tank. When the solution tank is empty, the recovery tank must be emptied. Page 8 Operator's Manual - Image 14 Clarke ®... -
Page 10: Operator's Maintenance
8. As you make passes, overlap one inch of the area already cleaned. 9. Make more passes until all of the room is cleaned. CAUTION: Clarke will not be held liable for dam- age to the carpet, or poor results be- cause of the operator's lack of ability. -
Page 11: How To Attach The Auxiliary Floor Tool
(one quart vinegar to one gallon of hot water) or an anti-browning solution (mixed as directed). 8. Remove any lint on the vacuum intake screen. The screen is located under the recovery tank and on the rear of the machine. Page 10 Operator's Manual - Image 14 ® Clarke... -
Page 12: How To Prevent Damage From Freezing Temperatures
WARNING: Maintenance and repairs must be done by authorized personnel only. Keep all fasteners tight. Use only Clarke parts. Maintenance performed by someone other than a Clarke distributor or Clarke replacement parts could void your war- ranty. Electrical WARNING: Electrical repairs must be done by au- thorized personnel only. - Page 13 NOTES Page 12 Operator's Manual - Image 14 Clarke ®...
-
Page 14: Section Ii Parts And Service Manual
Division of Image 14 Section II Parts and Service Manual (70088A) Operator's Manual - Image 14 Page 13 ® Clarke... -
Page 15: Authorized Personnel Maintenance
1. Remove (6) screws in rear plate that secure solu- tion tank to machine. 2. Remove solution tank from machine. 3. Access the brushes or the (3) bolts that secure the vacuum motor to tank. Page 14 Operator's Manual - Image 14 Clarke ®... -
Page 16: How To Correct Problems In The Machine
1. Reset circuit breaker. 2. Switch is bad... 2. Contact an authorized service person. 3. Motor is bad..3. Contact an authorized service person. 4. Belt is broken..4. Contact an authorized service person. Operator's Manual - Image 14 Page 15 ® Clarke... -
Page 17: Final Assembly Drawing & Parts List Image 14
® Clarke Image 14 Drawing and Parts List Final Assembly 4/98 Ref. Part No. Description Page 15 Handle Assembly Page 16 Recovery Tank Assembly Page 17 Solution Tank Assembly Page 18 Brush/Pump Assembly 80013A Bolt, Shoulder Page 19 Main Frame Assembly... -
Page 18: Handle Assembly Drawings & Parts List
Clarke ® Image 14 Drawing & Parts List, Handle Assembly 4/98 Form #15347A To main frame assembly Ref. Part No. Description 34811B Handle, Control 57002A Post, Knob 55538A Knob, Handle Lock 49761B Harness, Wiring 56459A Strain Relief (supplied w/item 4) -
Page 19: Recovery Tank Assembly Drawing & Parts List
® Clarke Image 14 Drawing and Parts List, Recovery Tank Assembly 9/02 Form #10450A Ref. Part No. Description 692409 Chain, Cover 86303A Screw, #10-24 x 1.25 81901A Nut, #10-24 30290A Tank, Recovery 962954 Screw, 10-24 x 55670A Lid, Recovery 31803A... -
Page 20: Solution Tank Assembly Drawing & Parts List
® Clarke Image 14 Drawing and Parts List, Solution Tank Assembly 9/02 Form #10451A To Vacuum Motor To Recovery Tank Ref. Part No. Description 56476A Strainer, Vacuum 54371A Gasket, Vac 85398A Screw 30288A Tank, Solution 51518A* Bushing 52417A* Connector, x ¼... -
Page 21: Brush/Pump Assembly Drawing & Parts List
® Clarke Image 14 Drawing and Parts List, Brush/Pump Assembly 9/01 Form #17651A Ref. Part No. Description Ref. Part No. Description 32400A Cover, Brush 63535A Frame, Brush/Pump 920056 Nut, 6 x 32 Elastic 32408A Guard, Pulley 51713A Brush, Carpet 35147A See page 19 ref. -
Page 22: Main Frame Assembly Drawing & Parts List
Clarke ® Image 14 Drawing and Parts List, Main Frame Assembly 9/01 Form #17650A Ref. Part No. Description Ref. Part No. Description 732870 Elbow, ¼ MPT x 170030 Hosebarb, 50248A Clamp, Hose 980603 Washer, #10 Ext. Tooth 41427A Breaker, Circuit w/ Nut 120V... -
Page 23: Pump Drawing & Parts List
Clarke ® Image 14 115V Drawing and Parts List 10/97 Brush/Pump Unit Ref. Part No. Description 55446A Check Valve Assembly 55447A Kit, Upper Housing 55448A Kit, Bypass Valve Assembly 55449A Kit, Diaphragm 55450A Kit, Drive Assembly 44926A Motor 55174A Head, Pump, 45 psi NOTE: 55174A (includes # 1,2,3,&... -
Page 24: Connection Diagram 120 Volts
Clarke ® Image 14 120 Volt Connection Diagram 3/98 Operator's Manual - Image 14 Page 23 ® Clarke... -
Page 25: Electrical Schematic 120 Volts
® Clarke Image 14 120 Volt Electrical Schematic 03/98 Page 24 Operator's Manual - Image 14 Clarke ®... -
Page 26: Authentic Clarke Products
Authentic Clarke ® Products 9/01 Part No. Description 30108A Adaptor, 2" to 1½ 59231A RM-4P Tool Assembly 59230A RM-8P Tool Assembly 59229A RM-12M Tool Assembly 59232A Hide-A- Hose 10' 59228A RM-4M Tool Assembly 398426 Defoamer *1 case 398425 Extractor, Concentrate... - Page 27 NOTES...
- Page 28 ALTO Nederland B.V. Vianen (770) 973-5225 Stuartweg 4C NL-4131 NJ Vianen +31 347 324000 ® Clarke Clarke American Sanders ALTO Sverige AB, Molndal (Sweden) A.L. Cook Aminogatan 18 Customer Service Headquarters and Factory Box 4029 2100 Highway 265 S-431 04 Molndal...
- Page 29 (b). Return the product to the nearest Clarke repair location. Transportation charges to and from the repair location must be prepaid by the purchaser. (c). Clarke will repair the product and or replace any defective parts without charge within a reasonable time after receipt of the product.
Need help?
Do you have a question about the IMAGE 14 120V and is the answer not in the manual?
Questions and answers