Advertisement
Buttons
1.
Hazard Warning button
2.
MODE button
3.
Position (side) light button
4.
High or Low speed (Outdoor/Indoor)
5.
Headlights button
6.
SET button
7.
Horn button
8.
Left indicators button
9.
Right indicators button
(a) Braking
The scooter has an electromagnetic brake
which operates automatically when the
speed lever is released. It also features a
cable brake which can be operated by the
user. To operate the cable brake, squeeze
the lever on the left hand side of the
handlebars.
(b) Speed Lever (Throttle)
The user moves the scooter by squeezing
the lever on the handlebars towards the
user. The more the user squeezes the lever,
the faster the scooter will travel. Release
the lever to stop the scooter.
To allow the scooter to move forward,
squeeze the right hand side of the lever
back with your fingers.
S8 Aviator Owner's Handbook
To allow the scooter to reverse, squeeze
the left hand side of the lever back. The
scooter will sound a warning beep when
reversing.
Do not attempt to squeeze both sides of
the lever at the same time and always
release the lever before changing the
direction of travel.
(c) Speedo Operation
To show the Speedo on the numerical
display, press the MODE button until the
Speed function is shown.
The speedo will show speed the scooter is
currently travelling at in miles per hour
(mph) or kilometers per hour (kph).
To change the speedo to show mph or kph:
1.
Press the MODE button until the
display shows the Speed function.
2.
Hold down the MODE and SET
buttons until the clock starts flashing.
3.
Then press SET to change to the
required setting.
4.
Hold down the MODE and SET
buttons for 2 seconds.
(d) High / Low / Speed setting
To select high speed, press
the HIGH / LOW button
until the display shows the
Hare (as shown)
To select low speed, press
the HIGH / LOW button
until the display shows the
Tortoise (as shown)
Page 7
Hide quick links:
Advertisement
