Interacoustics Affinity2.0 Quick Manuals page 76

ITE/Open Fittings/Receiver in the ear
Required Items:
2
1. The Affinity hardware.
2. The HIT440 software.
3. A coupler microphone.
4. A coupler (usually 2cc).
5. An ITE adaptor for 2cc coupler.
6. A reference microphone.
7. Blue putty to secure the
hearing instrument to the 2cc coupler.
Positioning the ITE hearing instrument:
Place coupler at the back with hearing aid facing forward and the
microphone at the cross. (For multiple microphones, rotate the
hearing aid to get equal horizontal positioning of the mic inputs).
Connect the ITE adaptor to the 2 cc coupler and attach the
hearing aid using blue putty.
ITE pick-up coil test: For this particular test only: Position the
coupler for maximum sensitivity of the coil.
Positioning the Open Fit/Receiver in the ear hearing instrument:
Connect the ITE adaptor to the 2 cc coupler. Remove the
tip/dome from the hearing instrument and attach it to the ITE
adaptor using the blue putty. Place the coupler tube pointing
straight forward and the microphone at the cross.
Item No. 8105093 – 12/2013
Page 2 of 4