Table of Contents
Advertisement
"FAULT" Light
This light comes on when an error occurs:
•
The stove runs out of pellets
•
During initial start-up (for a split second) or for improper electrical frequency
•
A start-up sequence that does not result in the heater coming up to temperature
To reset the fault light, turn the mode switch to off and re-start the stove.
Power Outages
If a sustained power outage occurs while in "Manual", the stove will go to a "cool down" mode to
vacate smoke once power returns. If the power outage was short, the heater will go to the start-up
sequence. If in "Auto", the stove will re-start (if the room is cool).
!
Because this stove relies upon a blower to evacuate the smoke, some smoke may enter
the home during a power outage. To keep to a minimum, leave the door closed.
Travis Industries
Operation
HEAT OUTPUT
E
AUTO
OFF
MANUAL
E
MANUAL
START
FAN
FAULT
4 0 1 1 0 0 9
2 3
9 3 5 0 8 1 2 6
Advertisement
Table of Contents
