Table of Contents
Advertisement
IMPORTANT: Do not press hard or silicone thickness between the glass and door will be reduced,
resulting in poor bonding.
6. The door assembly should now be put in an area where it will not be disturbed for at least 24 hours.
Depending on the conditions, the curing time of this adhesive is 24 to 36 hours.
7. After 24-hour curing period, install main door on dryer by reversing step 1.
IMPORTANT: Do not press hard or silicone thickness between the glass and door will be reduced,
resulting in poor bonding.
6. Reinstall the four 10-32 acorn nuts that where removed in step #3.
As of October 24, 1997
Prior to October 24, 1997
26
Advertisement
Table of Contents
