Changing Ring Tones - Snom m9 DECT Administration Manual

2. Select a setting. The three options are described below:
• Activate: The display goes to power-saving mode after 10 seconds, and the keypad LED is
switched off to save power.
• Deactivate: The display turns off completely after 10 seconds, and the keypad LED lights up inter-
mittently.
• Always: The display stays on permanently (high battery consumption mode), and the keypad LED
stays lit.
3. Press OK to save the setting.

Changing Ring Tones

You can set the volume and ring tones for external calls and internal calls.
• Volume: You can choose between six volumes (1–6, from low to high). You can also turn the ringer
off (0).
• Ring tones: Ten different ring tones are available, including traditional, jazz, rambler music, space
music, and classical dance.
In idle status:
1. Press the center navigation button, followed by
2. Select a setting, e.g., External Calls.
3. Set the volume (1–6), then scroll to the next line and select a melody.
4. Press OK to save the settings.
Changing the Volume in Speaker Mode
The Ear Protection setting activates lower speaker volumes on connected snom m9 handsets. By default this
setting is turned on. To re-enable the normal speaker levels on the connected handsets:
1. Log in to the m9 web interface.
2. Click the identity that belongs to the handset.
3. Click Behavior, then set Ear Protection to off.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
Customizing the Handset
g g
Audio Settings Ringer Settings.
75