Snom m9 DECT Administration Manual page 16

snom m9 DECT Administrator Guide
Note: TAHI (Broken Register) performs the same function as Broken Registrar on the snom 3xx.
• RTP Encryption: Enables media encryption on the m9 (toggles between SAVP/AVP). Enable this
setting if Media Encryption (SRTP) functionality is desired
• Offer ICE: Allows the snom m9 to offer ICE candidates for outgoing calls (Microsoft Lync func-
tionality)
• Dial Plan String: See
• Proposed Expiry (sec): SIP registration expiry in seconds.
• DTMF via SIP INFO: Enables DTMF for IVR function with SIP INFO method.
• Conference URI: URI for server hosted call conference.
3. Click Save.
Assigning Handsets to Extensions
This section shows you how to register an extension to the m9 handset (instructions for Microsoft® Lync 2010
are also provided). Registering a handset to an extension is done from the m9 web interface. To access the
interface, the IP address of the base station is required (see
1. Enter the base station's web interface by opening a browser window and entering the IP address of
the base station (e.g., http://192.168.4.38), then press Enter.
2. Log in using the default login credentials:
Default user name: admin
Default password: password
8
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
"Dial Plans" on page 35.
Important: The device will be inaccessible if both the
DECT PIN and the Web portal password of the snom
m9 are forgotten. Under these circumstances, the
base station can be reverted back to factory default by
dialing the recovery code **0000** from any regis-
tered handset.
Page 5).