Snom m9 DECT Administration Manual page 17

3. Click Identity 1 from the left navigation panel, and configure the following parameters (see next page).
Note: An Identity on the device corresponds to a single a user. Each identity provides its own prefer-
ences and behavior desired by the individual user.
• Identity active: Set to on.
• Display Name: This name will be displayed on the handset, e.g., John Smith.
• Account: PBX extension number.
• Registrar: IP address or domain name of the PBX.
• Outbound Proxy: IP address or domain name of the PBX. When using a domain name, prefix the
domain name with sip: (e.g., sip:mycompany.com).
• Authentication Name: If no authentication name is provided, the Account setting is used.
• Password: Use the SIP password that belongs with the extension that was configured in the IPBX
or SIP server.
Microsoft® Lync 2010 Integration
Disclaimer: The Microsoft Lync 2010 Server functionality of the snom m9 is still under
development, and snom cannot guarantee functionality in all user environments.
• Identity active: Set to on.
• Display Name: This name will be displayed on the handset, e.g., John Smith
Account: The user's OCS usermame, e.g., John.Smith.
•
• Registrar: The OCS domain, e.g., company.com.
• Outbound Proxy: The server address, e.g., sip:ocs.company.com
Note: It is also possible to specify the port and transport layer: e.g.,
sip:ocs.company.com:5060;transport=tcp (Use TCP/Port 5060)
sip:ocs.company.com:5061;transport=tls (Use TLS/Port 5061)
• Authentication Name: Domain name\account name (e.g., mycompany\John.
Smith).
• Password: Use the password that belongs with the extension.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
Setting up the Handsets for Use
9