Table of Contents
Advertisement
Instruction manual: CITIZEN Eco-Drive Proximity
Bluetooth 4.0 wireless technology
Bluetooth is a type of wireless communication technology used over
distances of about 5 m (16-1/2 feet) to 10 m (33 feet) from handheld
information products such as smartphones, head sets and game
gadgets.
• This watch supports the Bluetooth 4.0 utilizing the electricity saving
technology, Bluetooth 4.0 (Bluetooth Low Energy).
• The communication distance using Bluetooth may become smaller
when obstacles such as walls exist. It may be particularly affected by
the human body such as your arms.
The Bluetooth communication technology of this watch may not be
usable depending on the law of the country. For a list of countries
where it can be used, visit the following web page. If using this watch
in a country other than those listed, you may be punished by the law
of the country. Please confirm before use.
Citizen Watch global site: "http://www.citizenwatch-global.com/ "
"Service & Support".
Within the frequency band (2.4 GHz) used by this watch, local area
wireless stations (wireless stations requiring a license) for identifying
the mobile objects used on the production lines of factories, etc. in
addition to industrial, scientific and medical applications such as
microwaves, specific low electric power wireless stations (wireless
stations not requiring a license), and amateur radio stations (wireless
stations requiring a license) are operated.
• Please make sure that neither local area wireless stations for
identifying mobile objects, specific low electric power wireless
stations, nor amateur radio stations are being operated nearby before
using this watch.
• Should any case of harmful radio wave interference from this watch
to local area wireless station for identifying mobile objects occur,
please stop using Bluetooth 4.0 immediately and consult the nearest
Authorized Citizen Service Center for necessary steps to avoid
interference.
• Should any trouble including other cases of harmful radio wave
interference from this watch to specific low electric power wireless
stations or amateur radio stations, please consult the nearest
Authorized Citizen Service Center.
• The connectable distance for the Bluetooth 4.0 is approximately 10 m
(33 feet) in an ideal location. Placing the transmitter and receiver
behind reinforced concrete or metallic walls may block radio waves
and disrupt sufficient communication. The communication distance
may shorten depending on the environment where this watch is
used.
• Placing this watch and the following electronic devices within close
range may cause problems such as malfunction due to radio wave
interference and production of noise.
- Devices utilizing the 2.4 GHz frequency range including wireless
LAN, microwaves, and digital cordless phones. Radio wave
interference may cause cutting off of the sound.
- Audio video equipment with an antenna input terminal including
radios, TVs, video recorders, and satellite tuners. Noise may occur
in the sound and image.
• Due to the use of radio waves, messages transmitted through
this watch may be eavesdropped by third parties intentionally or
accidentally. Do not use this watch for important communication or
any communication involving human lives.
a
Adjusting the time and calendar manually
[TME]/[CAL]
Adjusting the time — [TME]
1
Change the mode to [TME].
2
Pull the crown out to position
The second hand rotates to indicate the current
time.
3
Press and release the lower right button
upper right button
The second hand moves to indicate the 0 seconds
position.
4
Rotate the crown to adjust the time.
• You can adjust the time in one minute increments.
• The hour and minute hands and 24-hour hand on
the upper left sub dial move in conjunction with
one another.
• When adjusting the time, be sure to pay particular
attention to the 24-hour hand to ensure AM or PM
time is set properly.
• If you spin the crown quickly a few times, the
hand will move continuously. To stop the rapid
movement, rotate the crown in either direction.
5
Push the crown in to position
a reliable time source to finish the procedure.
This completes manual time adjustment.
Adjusting the Calendar — [CAL]
• The hour and minute hands and 24-hour hand on the upper left sub
dial will indicate the time set in [TME] mode.
• While in [CAL] mode, notifications will be through watch vibration
only. Visual notification by the second hand occurs only in [TME],
[L-TM], [PR] or [CT] mode.
1
Change the mode to [CAL].
2
Pull the crown out to position .
The second hand rotates to indicate the current
month and leap year set in memory, while the
function hand on the upper right sub dial rotates
to indicate the current day of the week set in
memory.
3
Rotate the crown clockwise to adjust the month and
leap year.
• See page 8c for instructions on how to read the
month and leap year setting.
• Each time you rotate the crown, the second hand
moves by one step.
4
Press and release the upper right button
The function hand on the upper right sub dial will
move slightly to indicate that the date can be set.
b
5
Rotate the crown to adjust the date.
• Each time you rotate the crown fully clockwise, the function hand on the
upper right sub dial will rotate five times and the date will advance by one
day. When you rotate the crown fully counterclockwise, it will go back by
one day.
• If you spin the crown quickly a few times, the date will move continuously.
(See page 3b.)
To stop the rapid movement, rotate the crown in either direction.
6
Press and release the upper right button
.
The function hand on the upper right sub dial will move slightly to
indicate that the day of the week can be set.
7
Rotate the crown to adjust the day of the week.
or
• Each time you rotate the crown fully clockwise, the day of the week will
.
advance by one day. When you rotate the crown fully counterclockwise, it
will go back by one day.
• When pressing and releasing the upper right button
of the week, you can return to setting the month and leap year.
8
Change the mode to [TME] (or [L-TM]) to finish the procedure.
(See page 3b.)
• The date will change at approximately 0:00 a.m. (midnight). This
process takes approximately 5 seconds to complete.
Month and year indications
The month and leap year are indicated by the position of the second
hand when in [CAL] mode.
When set correctly, the watch will be automatically adjusted for
in accordance with
months shorter than 31 days as well as for leap years.
The month and leap year are
indicated by the hour and minute
indices. The years since the last
leap year are indicated by the first
three minute indices past each
hour.
(See page 3b.)
Each minute mark
denotes the number of
years since the last leap
year.
Quick reference chart for number of years passed since leap year
.
Indication of the second hand
Hour marker
1st min. marker
2nd min. marker
3rd min. marker
.
after setting the day
Nov.
Dec.
Oct.
Jan.
Sept.
Feb.
Aug.
Mar.
July
Apr.
June
May
Leap year
1st year since leap year
2nd year since leap year
3rd year since leap year
In the example above, the second hand indicates
April and 2 years since the last leap year.
Leap Year/Years since leap year
Actual year
Leap year
2012, 2016, 2020
1st year
2013, 2017, 2021
2nd year
2014, 2018, 2022
3rd year
2015, 2019, 2023
c
8
Hide quick links:
Advertisement
Table of Contents
