Information; Specifications - Citizen Eco-Drive Proximity Instruction Manual

Instruction manual: CITIZEN Eco-Drive Proximity
Precautionary items and usage limitations (continued)
<Magnetism>
• Analog quartz watches are powered by a step motor that uses a magnet. Subjecting the
watch to strong magnetism from the outside can cause the motor to operate improperly
and prevent the watch from keeping time accurately.
Do not allow the watch to come into close proximity to magnetic health devices (magnetic
necklaces, magnetic elastic bands, etc.) or the magnets used in the latches of refrigerator
doors, clasps used in handbags, the speaker of a cell phone, electromagnetic cooking
devices and so on.
<Strong Shock>
• Avoid dropping the watch or subjecting it to other strong impact. It may cause
malfunctions and/or performance deterioration as well as damage to the case and bracelet.
<Static Electricity>
• The integrated circuits (IC) used in quartz watches are sensitive to static electricity. Please
note the watch may operate erratically or not at all if exposed to intense static electricity.
<Chemicals, Corrosive Gasses and Mercury>
• If paint thinner, benzene or other solvents or products containing these solvents (including
gasoline, nail-polish remover, cresol, bathroom cleaners and adhesives, water repellent,
etc.) are allowed to come into contact with the watch, they may discolor, dissolve or crack
the materials. Be careful when handling these chemicals. Contact with mercury such as
that used in thermometers may also cause discoloration of the band and case.
<Protective Stickers>
• Be sure to remove any protective stickers that may be on your watch (case back, band,
clasp, etc.). Otherwise, perspiration or moisture may enter the gaps between the protective
stickers and the parts, which may result in a skin rash and/or corrosion of the metal parts.
CAUTION
Always Keep Your Watch Clean
• Rotate the crown while it is pressed in fully and press the buttons periodically so they do
not become stuck due to accumulations of foreign matter.
• The case and band of the watch come into direct contact with the skin in the same manner
as undergarments. Corrosion of the metal or unnoticed soiling such as that caused by
perspiration and dirt can soil sleeves and other portions of clothing. Keep your watch
clean at all times.
• The case and band of the watch come into direct contact with the skin. If you think there is
something wrong, discontinue wearing the watch immediately and consult your physician.
In the case of accumulation of sweat or dirt on a metal band or case, clean thoroughly
using a brush and neutral detergent. In the case of a leather or rubber (urethane) band,
wipe clean using a dry cloth.
• Leather bands may become discolored by perspiration or dirt. Always keep your leather
band clean by wiping with a dry cloth.
Caring for Your Watch
• Wipe any dirt or moisture such as perspiration from the case and crystal with a soft cloth.
• For a metallic, plastic or rubber (urethane) watchband, wash any dirt off with water.
Remove the small amounts of dirt trapped between the crevices of the metallic band with
a soft brush.
• For a leather band, wipe off dirt using a dry cloth.
• If you will not be using your watch for an extended period of time, carefully wipe off any
perspiration, dirt or moisture and store in a proper location, avoiding locations subject to
excessively high or low temperatures and high humidity.
<When Luminous Paint is used for your watch>
The paint on the dial and hands helps you with reading the time in a dark
place. The luminous paint stores light (daylight or artificial light) and glows
in a dark place.
It is free from any radioactive substance or any other material harmful to a
human body or environment.
• The light emission gradually becomes weaker as time passes.
• The duration of the light ("glow") will vary depending on the brightness, types of and
distance from a light source, exposure time, and the amount of the paint.
• The paint may not glow and/or may dissipate quickly if exposure to light was not
sufficient.
a

Information

About Bluetooth
Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
Some countries may prohibit the usage of the Bluetooth. See page 8a.

Specifications

Model W760 Type Analog solar-powered watch
Within ±15 seconds per month when worn at normal
Timekeeping accuracy
operation temperatures (between +5˚C/41°F and
(without reception)
+35˚C/95°F)
Operating temperature
–10˚C/–14°F to +60˚C/140°F
range
• Time: Hours, minutes, seconds, 24-hour
Display functions
• Calendar: Date, day of the week
• Fully charged to fully discharged (when power save
feature works about 7.5 hours a day):
Approximately 8 months (with using iPhone)
Maximum run time from
Approximately 17 months (without using iPhone)
full charge
• Power reserve upon insufficient charge warning
function:
Approximately 10 days
Battery Rechargeable cell (lithium button cell), 1pc.
• Solar power function
• Power reserve indication (in four levels)
• Overcharging prevention function
• Insufficient charge warning function (two-second
interval movement)
• Energy saving function (power save feature)
• Indications relative to iPhone
Connection status indication (ON/OFF)
Additional functions
Indication of ongoing communication processing
(ACT)
Notification indication (CALL/MAIL/LL)
• Chronograph (up to 60 minutes in one second
increments)
• Local time
• Perpetual calendar (until February 28th, 2100)
Specifications and contents of this booklet are subject to change
without prior notice.
b
European Union Directives Conformance Statement
Hereby, CITIZEN WATCH CO., LTD., declares that this
H15 is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
You can view your product's Declaration of Conformity (DoC) to
Directive 1999/5/EC (the R&TTE Directive) at Citizen Watch global
site:
"http://www.citizenwatch-global.com/ "
RF Exposure Information according to 2.1091/2.1093/OET bulletin 65
Radio frequency radiation exposure Information:
The radiated output power of the device is for below the FCC radio
frequency exposure limits.
FCC statements
This device complies with part 15 of the FCC Rules and Industry
Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L' e xploitation est
autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d' e n
compromettre le fonctionnement.
c
12
"Service & Support"