Installing the oven into the kitchen cabinet
Ventilation
cut out.
Ventilation
cut out.
Fixing the oven into a cabinet.
o Ensure that the aperture that you will be fitting the oven into is
of the size given in the above diagram.
o Ensure that the rear panel of the furniture housing unit has been
removed.
o This oven may be installed without any additional ventilation cut
outs being made in the housing unit. However the ventilation cut
out indicated by the arrow in figure 1 MUST be present,
otherwise the oven may overheat. This applies to a built in or
built under installation.
o Ensure that the oven has
been securely fixed into
the housing unit. The
fixing of the oven into
the housing is made by
using four screws. These
should be screwed
through the oven cabinet
and into the housing
unit.
25