Removable Oven Roof Liner; Replacing The Oven Bulb - Baumatic TG1 Instruction Manual

60cm multifunction built in oven
Hide thumbs Also See for TG1:
Table of Contents

Advertisement

Removable oven roof liner

o Your appliance is supplied with a roof liner, which should be slid
over the top of the grill element.
o Once you have finished cooking, the liner should be removed
and thoroughly cleaned after each use of the appliance.
o Do not allow fat and grease to build up on the oven liner, as this
could cause a fire hazard.

Replacing the oven bulb

IMPORTANT: The oven must be disconnected from
your mains supply before you attempt to either
remove or replace the oven bulb.
o Remove all oven shelves, the drip tray and the side rack that is
on the same side as the oven light.
o Using a screwdriver, remove the lamp cover.
o Unscrew the bulb clockwise and remove it from its holder.
o Replace the bulb with a 25 W/300°C, screw type pigmy.
o Do not use any other type of bulb.
o Place the lamp cover back into position. There is a curve on one
side of the cover; this should be on the right hand side as the
cover goes back into place.
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sb1Mg1

Table of Contents