Component Identifi Cation - Hotsy 965SS Operating And Parts Manual

Unloader
Valve
Pump
Pump — Delivers a specifi c gpm to the high pressure
nozzle which develops pressure.
Spray Gun — Controls the application of water and
de ter gent onto cleaning surface with trigger device.
In cludes safe ty latch.
Detergent Injector — Allows you to siphon and mix
detergents.
Wand — Must be connected to the spray gun.
High Pressure Hose — Connect one end to water
pump high pressure discharge nipple and the other
end to spray gun.
8
COMPONENT IDENTIFICATION
Coil Outlet
Detergent
Injector
Spray
Gun
HOTSY 965SS-1075SS • 8.914-401.0 • Rev. 09/11
Burner
Exhaust
Unloader Valve — Safety device which, when the
spray gun closes, redirects fl ow of water.
Note: If trigger on spray gun is released for more
than 2 minutes, water may leak from the pump
pro tec tor. Warm wa ter will dis charge from pump
pro tec tor onto fl oor. This sys tem pre vents internal
pump dam age.
Hose
Hanger
Engine
High
Pressure
Nozzle
Wand
High
Pressure Hose