Violectric HPA V281 User Manual page 21

THE UNBALANCED LINE OUTPUTS
are located on the rear panel of the unit and are marked as "UNBAL
OUT LEFT" and "UNBAL OUT RIGHT". Gold-plated premium RCA
connectors are implemented here.
ACTIVATING / DEACTIVATING THE LINE OUTPUTS
PRE-POST FADER or FIXED-VARIABLE
The line-out signal can be tapped at two different points within the
V281's signal path.
If you wish to make use of the input signal without any level change –
for a device with its own level controls or recording purposes e.g. – the
Fixed-Out or Pre-Fader path (prior to level control) is the right choice:
In this case, the unaltered INPUT signal (prior to level control) is
forwarded to the line output.
If you want to feed a power amplifier or active loudspeakers, Variable-
Out or Post-Fader (including level control) should be used.
In this case, the line output provides the signal at the level set by the
volume control.
The V281's line output offers further possibilities:
- balanced-in to balanced-out
- unbalanced-in to balanced-out
balanced-in to unbalanced-out
-
unbalanced-in to unbalanced-out
-
The line outputs can be activated and
deactivated by means of the "LINE"
pushbuttons on the front panel.
The green LED indicates the activated
status.
This function can also be switched via
remote control:
Press "GREEN" (the green button)
21