Violectric HPA V281 User Manual page 19

DE- / ACTIVATING THE HEADPHONE OUTPUTS
THE BALANCED HEADPHONE OUTPUT
The HPA V281 offers a balanced headphone output.
This is equipped with a gold plated female 4-pin XLR connector.
UNBALANCED HEADPHONE OUTPUTS
The HPA V281 offers two stereophonic headphone outputs, each
equipped with a 1/4" (6.3mm) jack socket.
Because HPA V281 offers 4 channel amplifier (2 x stereo), each socket
is driven by a dedicated stereo amplifier
Please note: the RIGHT
phone jack is connected to the
in-phase stereo signal,
whereas the left phone jack is
connected to the 180
shifted signal.
The headphone outputs can be activated
or deactivated by pressing the "HEAD"
button on the front panel.
The green LED displays the activated
status.
This function can also be switched via
remote control.
Press „RED" ( the red button).
Balanced Headphone socket pin-out:
0
phase
19
Pin 1
Pin 2
Pin 3
Pin 4
Unbalanced Headphone
socket pin-out:
TIP Left channel
RING Right channel
SLEEVE
(+) Left channel
(-) Left channel
(+) Right channel
(-) Right channel
GND