Violectric HPA V281 User Manual page 16

NOTES:
- After inserting the USB connector, it may be necessary to close
and restart running media applications on the host computer.
- Volume of the host application should be set to 100%.
INPUT SELECTION / ACTIVATION
By means of the "XLR / RCA / DIG" pushbuttons on the HPA V281's
front panel, either of the analog inputs or the digital input (if present) can
be activated. The LED next to the corresponding button will light up
accordingly.
Inputs can also be switched by means of the remote control:
- press "1" on the remote control to select the XLR input
- press "2" on the remote control to select the RCA input
- press "3" on the remote control to select the DIG input.
Alternatively, the "channel up/down" rocker button or "up/down" on the
directional pad can be used to step inputs through.
16