Page 1
HEADPHONE AMPLIFIER Violectric HPA V550 Short Form Manual Short Form Manual HPA V550 Dezember 2022 F. Reim S. 1...
Page 2
The operating distance is about 5 - 7 meters (15 – 20 ft). With the “VOLUME +“ and “VOLUME -“ buttons the volume can be altered. This is done with a motor inside HPA V550 to get the volume knob into motion.
Page 3
SELECTING AN INPUT With the "ANALOGUE INPUTS“ button on the front panel one of three analogue inputs may be selected and the appropriate LED is on. Short Form Manual HPA V550 Dezember 2022 F. Reim S. 3...
Page 4
RESET OF THE PROCESSORS The buttons and the complete inner control of HPA V550 are in need of processors. If - of any reasons - nothing seems to work as it should anymore, follow these instructions to come back to DEFAULT SETTINGS: Push and hold the “ANALOGUE INPUTS”...
Page 5
“PRE-FADER” or “FIXED OUT” mode is the right choice. If you like to operate you HPA V550 as a pre-amp device of outstanding quality to drive some active speakers or power amps, than switch to “POST-FADER” or “VARIABLE OUT”.
Page 6
290 x 80 x 254 mm / 11,4” x 3,15” x 10” (W x H x D) Overall Dimensions: 290 x 90 x 282 mm / 11,4” x 3,5” x 11,1“ (W x H x D) Short Form Manual HPA V550 Dezember 2022 F. Reim S. 6...
Need help?
Do you have a question about the HPA V550 and is the answer not in the manual?
Questions and answers