Table of Contents
Advertisement
Top View
90° DOOR SWING
(optional setting)
Scale 1:1
IMPORTANT NOTE—FOR DISPENSER
MODELS: Dispenser models are
supplied with 2 dispenser trims,
one to fit framed panels and one for
overlay panels. Dispenser trim fit to
the custom panel depends on correct
panel thickness. Framed panels must
be 6 mm nominal. Overlay panels
should be constructed as shown to
accomplish a total 28 mm thickness.
See pages 7 and 8 for details.
Design Guide
Refrigerator
Door
5
Frameless Cabinets:
The case trim overlaps
cabinets at the top and
sides. Therefore, frameless
cabinets may require
filler strips to prevent
Case Trim
interference with cabinet
door swing. The opening
must allow for filler strips.
606 mm
From Rear of
Refrigerator
6 mm
6 mm
13 mm
19 mm
25 mm
32 mm
13 mm
19 mm
25 mm
32 mm
38 mm
19 mm Overlay
Panel
(Nominal Size)
Advertisement
Table of Contents
