Fitting The Cover - Triton ASPIRANTE Installation And Operating Instructions Manual

SECTION
8
check list
Fig.13
Fig.14
Installation - FITTING THE COVER

FITTING THE COVER

Fitting The Cover - valve & knob positions
• Turn the valve spindle clockwise until it stops
• Fit the trimplate.
• Turn the temperature control on the cover
• Offer the cover to the unit.
• Carefully locate the cover tags into the guide
• Guide the cover into position so that the
• Should any difficulty arise, recheck the points
• While applying slight pressure to the front
• Fit the flexible hose to the shower outlet
• DO NOT attach the showerhead at this
12
PLEASE NOTE
Before normal operation of the shower,
it is essential the following commissioning
procedure is completed correctly.
IMPORTANT
DO NOT connect the 10-way
ribbon cable before the
commissioning procedure
has been completed.
(fig.13).
fully clockwise until it stops (fig.14).
pockets on the backplate and make sure the
wires are not trapped.
control spindle locates correctly (minor
adjustment may be necessary to align the
control and spindle).
above.
cover, secure in position with the three
retaining screws.
making sure the outlet of the hose is directed
to waste. Check the supplied sealing washer
is in place.
stage.