Table of Contents
Advertisement
1. From the System Setup Utility "Available Tasks" window, choose Config Save/Restore. (Config
Save/Restore is available only in Expert mode.)
2. Click "Restore from File" and specify a filename and location.
NOTE
You can only load a configuration that has been previously saved with
the System Setup Utility.
To restore the system configuration from a file using the Server Configuration Utility:
1. Use the System Resource CD to boot the server to the Server Configuration Wizard.
2. Click on the "Continue>>" button.
3. Select the "Server Configuration Wizard" option and click on the "Continue" button.
4. Select the "Load from Diskette" option and click on the "Continue" button.
NOTE
You can only load a configuration that has been previously saved with the
Server Configuration Wizard.
The utility reads the platform type, BIOS revision, and firmware revision from the file and
compares that information with the same information retrieved from the server. If the two do not
match, an error message is displayed and the load operation aborts. If they do match, the utility
saves the configuration data to the server. You will need to reboot your server for the changes to
take effect.
60
Configuration Software and Utilities
Advertisement
Table of Contents
