Table of Contents
Advertisement
management
Configure for Remote
Serial/Modem
management
Configure for
Serial/Modem alerting
Configure for LAN
alerting
Create/modify the
service partition
Save/load configuration
data
44
off, or running diagnostic utilities.
Enable a connection to the server from a serial or Modem connection to
allow remote management functions, such as powering the server on or
off, or running diagnostic utilities.
Configure the server to send a telephone page in the event that a
hardware or firmware error occurs at the server.
Configure the server to send a notification message to a workstation
segment of the network in the event that a hardware or firmware error
occurs at the server.
If a service partition does not already exist, create one. If a service
partition has been created earlier, update it.
Save the configuration data to a file. Use this saved file to configure
other servers identically.
Configuration Software and Utilities
51
52
54
56
58
Advertisement
Table of Contents
