Starting Up The Machine - Tiger 370 CNC--MR Use And Maintenance Manual

Starting up the machine

32
When switching on the machine, proceed as follows:
" press the ON button.
" Press RESET twice.
The display shows the introductory and starting SCREEN.
" To continue press F9.
" The display suggests ZERO SETTING the machine. To carry out this opera-
tion, press F6. To go to the main menu, press F9.
During zero setting, the display will read ZERO SETTING IN PROGRESS,
which will continue to be displayed until the operation has been completed. While
zero setting is taking place, only the EMERGENCY button is active.
" When ZERO SETTING has been completed, the display will show the
COUNT STARTING VALUE for the X axis. Press F9 to continue.
5- -7