Machine Installation; Packaging And Storage - Tiger 370 CNC--MR Use And Maintenance Manual

Machine installation

Packaging and storage

Warning
Attention
MEP S.p.A. use packing materials that guarantee the integrity and protection of
the machine during its transport to the customer.
The type of packing differs according to the size, weight and destination.
Therefore the customer will receive the machine in one of two following ways:
1. on a pallet with straps and heat---shrink plastic;
2. on a pallet with straps, heat---shrink plastic and a wooden crate.
In both cases, for correct balancing the machine must be handled using a
fork--lift truck, inserting the tines at the points indicated by the arrows, using
the reference marks on the crate itself.
Before carrying out lifting operations, make sure that the weight of the ma-
chine, as indicated on the crating or other packaging, is within the forklift truck
load limit.
4
4- -1